Epson EMP-760, EMP-765 ON, correct, connection, projector list, Problems Solving, installed to the computer, When connected to a wired LAN, the meeting room without closing the

		User’s Guide
Problems Solving			89
	The projector cannot be monitored and controlled using the EMP Monitor function
	Check	Remedy

Is the wireless or wired LAN card inserted?		Check that the wireless or wired LAN card is correctly inserted into the card slot of the projector.
		"Inserting and Removing Cards" sp.17
Is the network cable connected correctly?		Check that the network cable is connected correctly. If it is not connected or is connected
		incorrectly, reconnect it.
	When connected to a wired LAN
Are the settings for connecting to a network		Check the network settings for the projector.
correct ?		s"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide
Has EMP Monitor function been correctly		Uninstall EMP Monitor and then re-install it.
installed to the computer?		s"If You would like to Uninstall the EasyMP Software" and "Installing EasyMP Software" in the
		EasyMP Network Setup Guide
Have all projectors that are to be monitored		Register the projector in the projector list. sEMP Monitor Operation Guide
and controlled been registered in the
projector list?
Has "Standby Mode" been set to "Network		If using the EMP Monitor function while the projector is in standby mode, change the "Standby
ON"?		Mode" menu setting to "Network ON". "Extended" - "Standby Mode" sp.66
Is power being supplied to the projector?		Check if the power supply to the location where the projector is set up has been interrupted, or if the
		circuit breaker for the electrical outlet that the projector is connected to has been tripped.

When Network Screen is running, the current image stays projected and connection from another computer is not possible

Check	Remedy
Has the person making the presentation left	If you try to connect to a projector from a computer while Network Screen is running and the
the meeting room without closing the	projector is already connected to another computer, the connection to the first computer will be
connection?	terminated and the projector will then connect to the next computer.
	If no projector keyword has been set in the projector or the keyword is known, it is possible to
	terminate the current connection and connect to the projector by establishing a new connection from
	the computer.
	If a projector keyword has been set in the projector and the projector keyword is unknown, terminate
	the connection from the projector and then reconnect. To terminate the connection from the
	projector, press the [Esc] button on the remote control, select the "Exit" button from the displayed
	menu and then press the [Enter] button on the remote control. Connect from the desired computer
	after terminating the connection.
	s"Disconnecting from a Network Connection" in the EasyMP Network Setup Guide