Epson EMP-760, EMP-765 "Setting" Menu

						User’s Guide
Using the Configuration Menu Functions							62
	"Setting" Menu
		Sub-menu		Function		Default
		Keystone	Corrects vertical keystone distortion in images.			Median value
			•When keystone correction is carried out, the projected			(0)
			image will become smaller.
			•If the text part of the image is blurred after keystone
			correction is carried out, decrease the sharpness setting.
		Auto	Sets the function for automatically detecting the projector			ON
		Keystone	angle and correcting keystone "ON" or "OFF" when the
			projector is tilted vertically.
			This function is only enabled when the "Projection"
			command in the "Extended" menu is set to "Front". If it is set
			to something other than "Front", this menu cannot be
			selected.
		Operation	When set to "ON", the operation of all buttons on the			OFF
		Lock	projector's control panel except for the [Power] button will
			be disabled.
			•When "Operation Lock" is set to "ON", the operation lock
			function can be cancelled by holding down the [Enter]
			button on the projector's control panel for approximately 7
			seconds.
			•If you change the setting, the new setting will take effect
			after exiting the configuration menu.
		Pointer	The shape of the pointer icon that appears when you press			Pointer 1
		Shape	the [Pointer] button on the remote control can be selected
			from the following three shapes.
			Pointer 1:	Pointer 2:	Pointer 3:
		Brightness	This lets you set the lamp brightness to one of two settings.			Low
		Control	Select "Low" if the images being projected are too bright			(Varies
			such as when projecting images in a dark room or onto a			depending on
			small screen.			country of
			When "Low" is selected, the brightness of the images is			purchase)
			reduced, the amount of electricity consumed and noise
			produced during projection are reduced and the lamp's
			operating life is extended.
		Volume	Adjusts the volume.			Median value
						(10)