Epson EMP-760, EMP-765 addressg, continue, For Windows, For Windows, Problems Solving, Not enough disk space, **.SIT already registered, bits. Do you want to continue

				User’s Guide
Problems Solving					96
			Check	Remedy
	Cannot find a projector of the specified IP			Check that "Wired LAN connection mode" or "Access Point Mode (Wireless LAN)" setting is being
	addressg.			used in the EasyMP configuration settings for the projector to be connected. In the wireless LAN
				setting screen, change to "Access Point Mode" if it is set to "Easy Connect Mode".
				Next, check the "IP Address" setting in the "Wired LAN" - "Basic" or the "Wireless LAN" - "Basic"
				configuration menu, and specify that IP address when connecting in IP connection mode. s"If No
				Connected Projectors Appear" in the EasyMP Operation Guide.
				If connection is still not possible, check the network settings at the computer and the EasyMP
				network settings at the projector.
				For details on network setting: s"Connecting in Access Point Mode or Wired LAN Mode" in the
				EasyMP Network Setup Guide
	Image transfer slows if PC resolution is higher			The display of the computer being connected to the projector is set to resolution higher than XGA
	than XGA (1024 ⋅ 768 pxl.) Do you want to			(1024 ⋅ 768).
	continue?			Clicking "Yes" connects the projector. However, the display speed of the projection screen will be
				slow.
		For Windows
				Clicking "No" aborts the projector connection. To avoid slow display speeds on the projection
				screen, change the computer display settings to: XGA (1024 ⋅ 768) or lower.
	Image transfer slows if screen color is more			The display of the computer being connected to the projector is set to a resolution of higher than
	than 24 bits. NS Connection converts it to 16			XGA (1024 ⋅ 768), or the screen colour has been set to 24 bits or more.
	bits. Do you want to continue?			Clicking "Yes" connects the projector. However, the display will be in 16 bit colour.
		For Windows

If an error message not described above is displayed, refer to the EMP NS Connection help.

Error messages from EMP SlideMaker2

Check	Remedy
**.SIT already registered.	It is not possible to add a scenario file name if it already exists in the "Autorun Scenario List".
(** is the scenario file name.)	s"Sending a Scenario" in the EasyMP Operation Guide
Not enough disk space.	The drive to which a scenario is being sent has insufficient free space and the scenario cannot be
	sent. Delete unneeded files on the destination drive to free sufficient disk space to save the scenario
	on the drive.