Epson EMP-760, EMP-765 correctly, E-Zoomfunction, Problems Solving, Has the "Resize" been set correctly, Only when projecting computer images, Only when projecting computer images

				User’s Guide
Problems Solving					84
		Image is truncated (large) or small
			Check	Remedy
	Has the "Resize" been set correctly?			Press the [Resize] button on the remote control. sp.51
	Is the image still being enlarged by the			Press the [Esc] button on the remote control to cancel the E-Zoom function. sp.52
	E-Zoom function?
	Has the "Position" setting been adjusted			If analogue RGB images from a computer or RGB video images are being projected, press the
	correctly?			[Auto] button on the remote control or the [Enter] button on the projector's control panel to carry out
				automatic adjustment.
				If the images have not been correctly adjusted after using the automatic setup function, adjust the
				setting manually using the "Position" menu command.
				If signals other than analogue RGB images from a computer or RGB video images are being input,
				adjust the setting manually using the "Position" menu command.
				"Signal" - "Position" sp.60, p.61
	Has the computer been set for dual display?			If dual display has been activated in the Display Properties of the computer's Control Panel, the
				projector will only project about half of the image on the computer screen. To display the whole of
			Only when projecting computer images
				the image on the computer screen, turn off the dual display setting.
				s Computer video driver documentation
	Has the correct resolution been selected?			Set the computer so that the signals that are output are compatible with this projector.
				"List of Supported Monitor Displays" sp.115
			Only when projecting computer images
				s Computer documentation