User’s Guide

Problems Solving

 

 

90

 

 

 

 

 

 

 

 

 

EMP NS Connection starts, but a projector is not found

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check

Remedy

 

 

 

 

 

 

 

 

Is the wireless or wired LAN card inserted?

Check that the wireless or wired LAN card is correctly inserted into the card slot of the projector.

 

 

 

 

"Inserting and Removing Cards" sp.17

 

 

 

 

 

Is the network cable connected correctly?

Check that the network cable is connected correctly. If it is not connected or is connected

 

 

 

 

incorrectly, reconnect it.

 

When connected to a wired LAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the access lamp of the wireless LAN card

If the access lamp is off, remove the wireless LAN card and re-insert it.

that is inserted into the projector lit green?

"Inserting and Removing Cards" sp.17

 

 

 

 

 

Is the projector displaying the EasyMP

Network connections are disabled while the EasyMP configuration setting screen is displayed.

configuration menu screen?

Close the configuration settings to return to the EasyMP standby window.

 

 

 

 

 

Is the computer ready for LAN card or in-built

Check whether the LAN device is functioning in the Device Manager. For example, "Control panel" -

LAN functionality to be used?

"System" - "Device Manager".

 

 

 

 

 

Is the wireless LAN setting for the computer

Change the wireless LAN settings at the computer to ad hoc mode.

 

g

s"Computer Wireless LAN Settings" in the EasyMP Network Setup Guide

set to ad hoc mode ?

Depending on the manufacturer of the wireless LAN card, you may be able to use a communication

 

When connected to a wireless

 

 

 

 

setting utility (such as Client Manager) to set ad hoc mode.

 

LAN in easy connection mode

 

 

 

 

"Ad hoc mode" may be expressed using some other terminology such as "Computer communication

 

 

 

 

using wireless LAN (WiFi)", "Wi-Fi ad hoc", "802.11 ad hoc", "802.11 Mode Connection" or "Peer

 

 

 

 

to Peer".

 

 

 

 

 

Is the DHCPg function of the wired LAN set to

Set the DHCP setting of the wired LAN to "OFF" in the EasyMP configuration setting screen.

"ON"?

s"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide

 

 

 

 

When connected to a wireless

 

 

 

LAN in easy connection mode

 

 

 

 

 

 

 

 

 

 

 

 

Has the network adapter been selected

If the computer that you are using has several LAN environments, the correct network adapter to be

correctly in EMP NS Connection?

used by EMP NS Connection must be selected, otherwise it will not be possible to connect. Start

 

 

 

 

EMP NS Connection and select the network adapter from the "Extension" - "Switch LAN"

 

 

 

 

(Windows) or "Extension" - "Network Set" (Macintosh) menu.

 

 

 

 

 

If making a wireless LAN connection, are

Please enable the wireless LAN.

there any settings within the power saving

 

features of your computer which disable the

 

wireless LAN?