Epson EMP-760, EMP-765 correctly, correctly, Problems Solving, adjusted correctly, from a video source, from the connected device, Only when projecting images

				User’s Guide
Problems Solving					85
		Image colours are not right
			Check	Remedy
	Do the input signal settings match the signals			If you connect a computer or RGB video to the [Computer/Component Video] port, and select
	from the connected device?			"Component Video" for "Computer Input" in the configuration menu, the projected image is tinged
				with purplish red.
				If you connect a component videog to the [Computer/Component Video] port, and select
				"Computer" for "Computer Input" in the configuration menu, the projected image is tinged with
				green.
				Select the correct signal format for the connected source.
				"Signal" - "Computer Input" sp.60, p.61
				If a component videog or S-Videogsource is connected to the projector, use the "Video Signal"
				menu command to select the video signal format.
				"Signal" - "Video Signal" sp.61
	Has the image brightness been adjusted			Use the "Brightness" menu command to adjust the brightness.
	correctly?			"Image" - "Brightness" sp.56, p.58
	Are the cables connected correctly?			Check that all of the cables required for projection are securely connected. sp.20– p.26
	Has the image contrastg been adjusted			Use the "Contrast" menu command to adjust the contrast.
	correctly?			"Image" - "Contrast" sp.56, p.58
	Has the colour been adjusted correctly?			Use the "Color Adjustment" menu command to adjust the colour.
				"Image" - "Color Adjustment" sp.57, p.59
	Have the colour intensity and tint been			Use the "Color Intensity" and "Tint" menu commands to adjust the colour and tint.
	adjusted correctly?			"Image" - "Color Intensity", "Tint" sp.58
			Only when projecting images
			from a video source