Loading Paper Manually

5.For printing on labels, envelopes, transparencies, and heavy paper, install the optional face-up output tray. Set the paper path selector on the back of the printer to the face-up position.

6.Press the MANUAL button. An M appears on the right side of the display, as shown below.

7.Make sure the ON LINE light is on; you can then send data to the printer from your computer.

8.To return to automatic loading, press the MANUAL button again.

Note: The manual feed selection is an attribute of the channel you are using. This means you can use the panel to select manual feed for each channel separately; the setting remains, even if the printer mode for that channel is switched. Also, this selection can not be canceled by printer command but only by the panel.

4-10 Paper Handling