Epson EPL-8000 Selec Type Options, SUB CONFIG, B-10Appendix B

Selec Type Options

After you select the font source, press	or	until the
display shows the font number you want; then press			to

select the font. If the font you select is a scalable font, you must perform an additional step as follows.

If you selected a proportional font, press			or	to select
the font’s point size. Then press		once to set.
	Menu/submenu		Available options
			4.00 to 999.75
			(in steps of 0.25)
If you selected a fixed pitch font, press			or	to select the
spacing in characters per inch. Then press			once to set.
	Menu/submenu		Available options
			0.44 to 99.99
			(in steps of 0.01)

You can select fonts that match the current orientation setting only. If you change the SYMSET or ORIENT settings, the available font numbers may change. To save the selected font as the default font, use the SAVE MACRO option in the Level 1 SYSTEM CONFIG menu.

SUB CONFIG

In HP emulation mode, the SUB CONFIG option includes two submenus.

Menu/submenu	Available options	I
	F O R M
	SYMSET

F O R M - Use the FORM option to set the number for the selected paper size and orientation. The setting you choose also changes the line spacing. This setting is affected by the PAGE SIZE, ORIENT, and FONT settings. If you select 0, the line spacing changes to l/6-inch.

B-10 Appendix B