Epson EPL-8000 7-36 Options, Checking the printer’s memory

Memory Options

Checking the printer’s memory

Perform the following steps to verify that you installed the chip sets properly and that the printer recognizes the memory:

1.Turn on the printer. You should then see the following:

•

•

All indicator lights on the panel light briefly

The ROM Check message appears.

2.When the RAM Check x.xMB message appears, make sure the printer displays the total amount of RAM that you now have installed (including the 1MB of internal memory).

If an incorrect amount appears, turn off the printer and remove the controller board. Make sure you installed each chip set in the correct sector and that each chip is fully seated. If the RAM check message is still incorrect, contact your dealer for assistance.

7-36Options