Level 2 Options

I/F CONFIG

Use this option to configure a printer interface. The settings are parallel for channel P and serial for channel S. This option is not available for channel O.

Menu/submenu

Available options

 

 

 

P (Parallel)

 

S (Serial)

 

 

The PARALLEL option has these three submenus:

Menu/submenu

Available options

 

 

 

SLCTIN

 

AUTOFEED

 

BUSY DELAY

 

 

Normally, you do not need to change these settings. Change them only when you have special requirements.

SLCTIN — When you set SLCTIN to OFF, the printer is continuously selected and ignores device control codes DC1 and DC3. In almost all cases, leave SLCTIN set to OFF. When SLCTIN is ON, the SLCTIN signal goes HIGH at power-on and the control codes DC1 and DC3 are valid.

Menu/submenu

Available options

 

 

 

ON or OFF

 

 

3-24 SelecType