Epson EPL-8000 CAUTION:, 7-30Options, Installing chip sets on the memory expansion board

Memory Options

3.Gently press the chip halfway into the socket. If it goes in at an angle, remove it with a chip puller or a small flat-head screwdriver; then reinsert the chip.

CAUTION: Be careful not to scratch the chip or the board when removing the chip.

4.Once the chip is properly inserted, push down firmly on both ends to make sure it is fully seated.

5.Repeat steps 1 through 4 for each of the remaining chips.

6.Reinstall the interface card, if necessary.

Installing chip sets on the memory expansion board

There are four sectors on the memory expansion board, each containing four chip sockets (identified by their IC numbers).

7-30 Options