Problems with GraphicsGraphic images do not print.

After changing the printer mode, you are unable to print graphics.

•You may not have the correct printer driver installed. If you try to print with a software package set for another printer, nothing will be printed. Make sure that the driver matches the currently selected operating mode.

You cannot print graphics using the serial interface (RS-232Cor

RS422).

•The WORD LENGTH option in SelecType Level 2 may not be set correctly. When printing graphics, make sure that you set an 8-bit data word and not a 7-bit word.

When printing a mix of text and graphics, the page does not print or is only partially printed. The display may also show SET FULL PRINT.

•The full print buffer setting needs to be changed. To correct this error, change the FULL PRINT setting in the SelecType LEVEL l SYSTEM CONFIG submenu.

Graphics cannot be printed and the display shows PAGE BUFFER FULL.

•The full print buffer or the receive buffer setting needs to be changed. to correct this error, change the FULL PRINT or RX-BUFFER setting in SelecType Level 1 as described in Chapter 3.

•Your printer may not have enough memory installed. You need to simplify the page or install additional memory. Press the CONTINUE button to clear the error. For information on memory options, see Chapter 7.

Troubleshooting 6-27