Manuals / Brands / Computer Equipment / Projector / Epson / Computer Equipment / Projector

Epson Home Cinema System manual

1 71

Download 71 pages, 4.41 Mb

Installation Guide

Contents

Page Copyright Notice Trademarks Contents Page Introduction Important Safety Instructions Do not attempt to use •Do not install the projector or screen where it may be subject to impact Page Wash hands after handling Parts List Included Cables Additional Accessories Where To Get Help Planning the Installation Required Tools Laying Out the Home Theater Locating the Screen Locating the Projector Locating Other Components Routing the Cables Making Optional Connections Cable Connections Installing the Screen Unpack the Screen and Speaker Grilles Attach the Speaker Grilles to the Screen Attach the Mounting Assembly to the Wall (Option 1) Mark the wall as shown below: Important Attach the Mounting Assembly to the Ceiling (Option 2) Page Connect the Cables to the Screen 4Connect one end of the Control Cable to the control port, as shown below Control Cable Connect the individual connectors of the Speaker Cable Place one end of the Page Lift the Screen onto the Mounting Brackets Page Installing the Projector Position the Ceiling Mount Next, determine the Page Attach the Extension Arm (Optional) Page Install the Ceiling Mount Mount the Projector 4Remove the bottom and rear covers from the projector enclosure Page Page Page Connecting and Routing the Cables Unpack the Wire Management Tracks Install the Tracks and Connector Pieces Connect the Cables to the Projector Connect the Cables to the Subwoofer and AV Controller 3Connect the following two cables from the screen to the subwoofer: •Speaker cable (connect it to the SPK OUT connector) SPK OUT •AC cable (connect it to either AC OUTPUT connector) AC OUTPUT 5.1CH OUT AC OUTPUT connector on the subwoofer. You your home 8Set the MASTER POWER switch to the ON position MASTER POWER PWR ON MODE Assembling the Subwoofer Stand 5Insert the rubber feet into the holes in the base 6Check all bolts to make sure they’re securely tightened Adjusting the Image Insert Batteries Turn On the System Adjust the Screen Position Position the Image When you’re done positioning the image on the screen Incline Adjustment With the Optional Extension Arm Use the projector’s Keystone setting to square up the image. Press the Settings Keystone 3You may need to use the zoom ring to enlarge the image slightly Adjusting the Projector Settings Set the Color Mode Adjusting the Sound Set the Boundary Control Switch Set the Speaker Distance Equalize the Speaker Output Adjust the Subwoofer Output If the disk doesn’t start playing automatically, press the DVD PHASE LEVEL 5Set the volume level on the AV controller to 0 dB After Completing the Installation Using Additional Components Connecting External Video Devices 2Point the remote control at the screen and press the MENU button Page In the right column of the same row (under Audio Input HDMI1 Coax Optical Press and hold both the ENT 4Select the P-PRO (Pre-Programmed)option on the LCD screen P-PRO SETUP Connecting Another Subwoofer Connecting an Antenna Using an Outdoor FM Antenna Using a Third-partyUniversal Remote Control