Epson Home Cinema System manual 25

7Tighten the screw on the face of each bracket to secure it to the alignment bar.

8Determine where the middle of the screen will be. Then position the middle bracket so it’s aligned with the middle of the screen. The set screw in the middle of the screen must engage with the bracket.

9If the middle bracket aligns with the center of a joist (see diagram below), attach it to the ceiling with two wood screws; otherwise use two Toggler anchors. If necessary, you can move the bracket slightly left or right to align the holes with a joist, as long as at least part of the bracket remains aligned with the middle of the screen.

Important

At least part of the bracket must align with the middle of the screen.

If attachment to joist is not possible, then attach with two Toggler anchors here

Joist

Align two holes with joist, if possible, and fasten with wood screws

10Tighten the two screws on the face of the bracket to secure it to the alignment bar.

25