Planning the Installation
Here are the basic steps required to install the home theater system. Allow at least 4 to 6 hours to complete the installation. Be sure to read the following pages before starting.
Note
Epson strongly recommends that the home theater system be installed by a professional audio/video installer or other qualified professional. Epson cannot provide advice concerning construction practices or building codes in your area.
Screen image
1 Plan the screen location and room layout. The seating area should be in the middle and the projector toward the rear. See page 14.
2 Hang the screen. Two persons are required to lift the screen. See page 19.
3 Install the ceiling mount and projector. Use a stud finder to locate wooden joists on which to mount the projector. See page 31.
4 Connect the equipment and route cables. Use the included wire management tracks to route the cables. See page 43.
5 Adjust the image and sound. See page 51.
13