Epson Home Cinema System Position the Image, Press, Press the, •S-UP to raise the screen, •S-STP to stop the screen, •S-DWN to lower the screen, 6Press S-UP to raise the screen fully

4Use the following commands to raise and lower the screen, and to stop it at the desired position:

•S-UPto raise the screen

•S-DWNto lower the screen

When the screen comes to a stop, press S-DWNagain to lower it beyond the current stop-position. You can bring it down as far as the maximum length preset by the factory, or 64 inches.

•S-STPto stop the screen

5Once the screen is positioned where you want it, press S-SETto set the screen position.

6Press S-UPto raise the screen fully.

Note

You must raise the screen all the way for the new position to take effect.

7Press S-DWNre-open the screen. Verify that it comes down and stops at the correct position.

Position the Image

1Press the Pattern button on the projector’s remote control. This displays an adjustment pattern to help you align the image.

2Rotate the focus ring to sharpen the image. Rotate the zoom ring to resize the image so it fits on the screen.

FocusZoom

53