Epson Home Cinema System Assembling the Subwoofer Stand, 1Unpack the stand from box #6, Follow these instructions to assemble the stand:

Assembling the Subwoofer Stand

If you like, you can use the included stand to store the subwoofer and AV controller. It also provides space for storing additional components.

Place AV controller or other components here

Place subwoofer here

Follow these instructions to assemble the stand:1Unpack the stand from box #6.

2Locate the base and set it flat on the floor or a worktable. You should see only the four holes for the rubber feet (the six holes underneath the base should face downward).

Side panels

Base

3Use the nuts and bolts to connect the side panels to the base. Insert the nuts into the holes underneath the base. Use a flathead screwdriver, if necessary, to align the nuts so the bolts thread into them. Make sure the side panels face the correct direction (the side with more holes should face inward). Tighten the bolts with the included Allen wrench.

Tip

You may find it easier to connect the side panels if you rest the stand on its back, instead of keeping it upright.

49