5Locate the 16-foot (5-meter) AV data cable (packed in box #3). Connect it from the 5.1CH OUT port on the AV controller to the INPUT port on the subwoofer.

Connect these ports with the

AV data cable

BASS CONTOUR CONTROL

FREQLEVEL

Connect power cord to

61 82

47 98

99

PWR ON MODE

outlet on subwoofer

SUB OUT

MASTER

POWER

6Connect the AV controller’s power cable to the remaining can also connect it directly to a grounded power outlet in

AC OUTPUT connector on the subwoofer. You your home.

7Connect the main power cord (packed with the subwoofer) to the power inlet on the back of the subwoofer. Connect the other end to a grounded power outlet in your home.

Note

It is recommended that the Ensemble HD system be powered by a dedicated 20-amp circuit. Typical power consumption is about 800 watts.

8Set the MASTER POWER switch to the ON position.

9Set the PWR ON MODE switch to the AUTO position. This lets the subwoofer turn on when it detects a signal.

10Wrap any excess cable, secure it with cable ties (not included), and store it behind the subwoofer.

48