4Remove the bottom and rear covers from the projector enclosure.
•Remove the bottom cover by sliding it off toward the front. (The cover is held in place with clips, which may be tight.)
•Remove the rear cover by pressing inward on one side to release the catch. While pressing inward, pull backward on the same side to separate the cover from the enclosure. Repeat on the opposite side.
21
Remove rear cover by
Pull cover backward | pressing inward on one |
side to release catch
5If you anticipate having excess cable near the projector, install the optional cable cleats on top of the projector enclosure. The cleats will let you wrap excess cable around them. Attach the cleats with the included screws at the points shown below.
Attach cleats
39