Note
The box also contains the wire management tracks and related pieces shown below. It is advisable to keep these parts together until they’re needed on page 43.
Corner connector | Seam cover | Drywall screws | ||
(6 pieces) | transition (2 sets) | (3 sets) | (20 pieces) | (100 pieces) |
2Unpack the speaker grilles from box #7. Note that two screws are packed with each grille. You will use them to attach the grille to the screen, as described in the next section.
Speaker grilles and screws
Attach the Speaker Grilles to the Screen
1Remove and discard the plastic covers that protect the speakers during shipping.
2Attach the speaker grilles. Hook each grille into the lip underneath the screen housing (where the screen itself comes out). Then attach the grille on top with the two screws that came with it.
Caution
Be careful not to damage the grilles when handling them. Do not hold the screen by the grilles, which are fragile and can be easily dented. Lift the screen only from the bottom and by holding the plastic covers on each end.
20