3Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds to enter the SETUP menu.

Note

You have 30 seconds to perform a step while you are in the SETUP menu. If you don’t press a button, the remote control returns to the MAIN menu.

MAIN button

ENT button

4Select the P-PRO(Pre-Programmed) option on the LCD screen.
SETUPP-PRO LEARN EDIT MACRO FAV1 OF 3

Select P-PRO

5Choose the name of the remote control menu that will operate the device. Make sure the name matches the device label you selected in the Source Assign screen on page 65. If you don’t see your device on the

screen, press the PAGE or (page up or down) button to view more options. Press the u or d button to highlight the desired option so it flashes, then press the SEL (Select) button.

Note

Some of the device names (DVD, RADIO, AUDIO, and PROJ) are already used by the Ensemble HD system, and you cannot select them.

If you’re setting up a type of component for which a menu name doesn’t exist (for example, an HDTV tuner or DVD recorder), you can change the name of the menu screen. See the section on using advanced remote control features in the User’s Guide.

ubutton

d button

SEL (Select) button

 

67