The Pull Tractor
The optional pull tractor (#7311 for the LQ-850, #7313 for the LQ-950, or #7312 for the LQ-1050) provides optimum continuous paper handling. The pull tractor is especially useful1 with continuous multi-part forms and labels. For best results, use the pull tractor along with the built-in push tractor, as described in this section.
After making sure that you have both parts of the pull tractor option as shown below, remove the packing material and save it in case you need to ship the unit later.
pull tractor cover
1 The short tear-off function cannot be used with the pull
A. tractor. Before you start printing with the pull tractor, make sure that DIP switch 2-7 is set to off. (See the section on setting DIP switches in Chapter 3;)
