Operating the Control Panel
SelecType
The settings you select using the SelecType panel remain valid even after you turn off, reset, or initialize the printer.
| 0 POWER |
|
| - FONT |
|
|
| ||
|
|
| Press this button to select a | |
| 0 READY |
|
| |
0 |
|
| character font. The orange | |
|
|
|
| indicator lights show which font |
S&c Type |
|
| ||
|
| - |
| has been selected. If optional font |
|
|
| modules have been installed, these | |
|
|
| ||
|
|
|
| |
|
|
|
| fonts can be selected by choosing |
|
|
|
| either SLOT A or SLOT B. See the |
FORM FEED
section on selecting fonts in this chapter for further information.
1 PITCH
Press this button to select the character pitch. You can choose 10, 12, or 15 CPI (character per inch) or PS (proportional spacing). The orange indicator light shows the selected pitch.
-L CONDENSED
Press this button to select either condensed or normal printing. The orange light is on when the printer is in condensed mode. In this mode, all characters are printed at approximately 60% of
their normal width. This mode cannot be combined with 15 CPI.
Two combinations do not work: draft proportional and condensed 15 cpi. If you try to choose one of these, the printer beeps three times.