The Pull Tractor

4.Then, tilt the tractor unit toward you until the front latches click in place over the front mounting pins of the printer.

5.Now load continuous paper as described on pages 2-6 to 2-10. However, in Step 5, position the left sprocket unit about 1/4 of an inch from the left before locking it in place.

6.After the paper is loaded in the push tractor, see that the printer is off line and press the FORM FEED button. This advances the paper one page so that you can fit the paper onto the pull tractor.

T.

Never use the platen knob to feed the paper while the

printer is turned on. If you need to adjust the loading

Aposition, be sure to use the micro-adjustment function described in Chapter 3.

7. Open the sprocket covers, and release the sprocket lock levers.

7-18