The Pull Tractor

14.Re-install the paper guide; then slide the edge guides together so they meet at about the middle of the paper’s width.

15.Install the pull tractor cover as shown below.

16.Press the ON LINE button to set the printer on line. Now you are ready to begin printing.

When you are finished printing

The short tear-off function cannot be used with the pull tractor.

If you want to tear off the last printed page at its perforation, press the ON LINE button to set the printer off line and press the FORM

FEED button to feed the paper forward an additional page before tearing off the paper.

Using the pull tractor alone

If you wish, you can use the pull tractor without using the push tractor. If you choose to do this, feed the paper from the rear above the metal guide and then load it. Be sure to pull the paper release lever forward to the continuous paper position after you load the

paper.

7-22