From the DEVICE LIST, select the device to be tested. Type the number of the device, then press Enter. The following menu appears:
Number of times to test device
1 - Run test one time
2 - Run test multiple times
0 - Exit
Enter selection number:
You can specify that the test be performed one time only or any number of times up to 9999. Running a test multiple times is for reliability testing of essential functions only; in most cases running a test only once is sufficient.
To perform the test only once, press 1 and Enter. Depending on the device you have selected, the program may then display a submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press 2 and Enter. You see this prompt:
Terminate checking if an error is detected (Y/N)?
Press Y and Enter to terminate checking if the device produces an error, or press N and Enter to repeat the tests regardless of whether errors occur. This prompt then appears:
How many times
Type the number of times you want to repeat the test; then press Enter. The tests for the device now start.