Mass Storage

The setup program assumes that your computer has an internal 1.44MB 3 1/2-inch floppy disk drive, an internal 20MB hard disk, and that you are not using an external 5 1/4-inch diskette drive. If this is true, you do not need to make any changes to the Mass storage portion of the setup program.

To change the mass storage information recorded by the setup program or to confirm that the current settings are correct, highlight Mass storage and press Enter. The following display appears:

Exit

Memory

Display

Coprocessor

+Mass storage Backlight period Gray scale

I

B

-A

-

-

1 1

II

>

 

 

 

 

 

 

 

 

 

Drive

B(external): None

 

 

 

 

 

Drive

C

 

 

 

: Type

2(20MB)

 

 

 

 

******

SAVE SETTINGS *******

 

 

 

 

 

 

 

 

 

 

 

If you are using an external 5 1/4-inch diskette drive, highlight Drive B (external). Then press Enter to select the type of external diskette drive you have installed. As you continue to press Enter, the display cycles through the available options: 360 KB,

1.2 MB, and None. Select the appropriate option for your system.

Your hard disk is most likely a Type 2,20MB disk. If it is not, highlight Drive c and press Enter. Then press Enter to select the type of drive you have installed. As you continue to press Enter, the display cycles through the available options: Type 3 (40MB), Type 4 (40MB) , None, and Type 2 (20MB). Select the appropriate option for your system.

Running the Setup Program 2-7