The screen displays the following message:

SELECT is used to install DOS the first time. SELECT erases everything on the specified target and then installs DOS.

Do you want to continue (Y/N)?

4.Press Y. The screen displays the following message:

WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE C: WILL BE LOST! Proceed with Format (Y/N)?

5.Press Y, then press Enter. MS-DOS begins formatting the primary partition. The screen continuously displays the changing head and cylinder numbers of the drive.

Because the formatting process takes a few minutes, your screen may go dark. Just press any key to make the information on the screen visible again,

When the procedure is complete, the screen displays the following message:

Format complete System transferred

Volume label (11 characters, ENTER for none)

3-8 Preparing the Hard Disk for Use