charge for at least five minutes before you start using the computer the first time, and leave the AC adapter connected while you use the computer.

Be sure to read “Using the Battery” in Chapter 4 for information on using the computer with the battery. It explains how to charge the battery fully; you should do this as soon as possible with your new computer.

4 Connecting a Printer

The Equity LT-286 has both parallel and serial interfaces (ports). You can easily connect a printer or plotter that has either type of interface. Just follow the instructions below. Of course, Epson offers a full range of printer products; consult your dealer for more information.

Connecting to the Parallel Interface

The computer’s Centronics®-compatible parallel interface uses a 25-pin, D-shaped female connector. Most Epson printers have parallel interfaces.

To connect a printer to the computer, you need an IBM- compatible printer cable. If you’re not sure which one you need, consult your Epson dealer. Once you have a printer cable, follow these steps to connect your printer to the parallel interface on the computer:

1.Place the printer next to your computer.

2.Before you connect the printer, make sure the power switches on the computer and printer are off. (The power switch for your computer is located on the back of the machine, on the left side as you face the keyboard.)

1-4Setting Up Your System