. If you have modified the gray-scale settings, press F1. The screen displays the current gray-scale assignments. If you want to make any changes, highlight Change settings and press Enter. The main setup menu appears again, and you can make any necessary changes.

When the settings are the way you want them, remove the Reference diskette and insert your working copy of the Startup/ Operating 1 diskette in drive A. Then highlight EXIT AND SAVE and press Enter. At this point, the program resets the computer using the new configuration, and MS-DOS is reloaded. After you press Enter twice to respond to the date and time prompts, the A> prompt reappears on the screen.

If the computer displays a setup error message while it is starting up, run the setup program again and check all your settings.

2-14 Running the Setup Program