3.Connect the computer’s power cord to the adapter’s input socket.

4.Plug the other end of the power cord into a grounded, 120-volt, AC wall outlet.

Be sure to read “Using the AC Adapter” in Chapter 4 for information on powering the computer with the AC adapter.

Note

The AC adapter cable has been designed to prevent it from being accidentally disconnected from the computer. To unplug the AC adapter, grasp the cable with your thumb on the flat part of the connector, Then pull it away from the computer, Do not

try to unplug the adapter by pulling on the cord.

3 Charging the Battery

The Equity LT-286 contains a rechargeable nickel cadmium (NiCad) battery pack that powers the computer when you are not using the AC adapter. Before you use the computer the first time, you must charge the battery.

When you plugged in the AC adapter in step 2, it started charging the battery. This happens whenever the adapter is connected to the computer and plugged into an electrical outlet. Let the battery

Setting Up Your System

1-3