To change the main memory setting, highlight Main. Then press Enter one or more times until the correct value appears.

To change the expansion memory setting, highlight Expansion. Then press the + key (either the gray + on the right side of the keyboard or the white + next to the backspace key) until the correct value appears.

For example, if you have installed a 2MB memory expansion module, press the + key until 2048KB appears. If you have installed two 2MB expansion modules, press the + key until 4096KB appears.

When you have finished making changes to the memory settings, highlight SAVE SETTINGS and press Enter.

Display

The setup program assumes that you are using either the built-in LCD screen in its normal 80-column mode or a color monitor (attached to the CRT connector) in 80-column mode. If this information is correct, you do not need to make any changes to the Display portion of the setup program.

To change the display information recorded by the setup program or to confirm that the current settings are correct, highlight Display and press Enter. The following screen appears:

I Exit

Memory

+Display

Coprocessor

Mass storage

Backlight period

Gray scale

2-4 Running the Setup Program