Adjusting the Screen Image

Adjusting the Screen Image

You can correct and adjust the screen image to obtain the best possible picture.

Adjusting the Image Size

The size of the projected image is basically determined by the distance from the projector to the screen. (Quick Setup poster)

If further minor adjustment is required, press the [Zoom] button on the projector's control panel to make the adjustment. Minor adjustments can be made to the image size to between a zoom ratio of approximately 1.0 to 1.2 in 33 steps.

The E-Zoom function lets you enlarge parts of the image. (p.32)

Procedure

Projector

Press the [Zoom] button on the projector's control panel.

When pressed to the [W] side, the image becomes larger.

Projector

When pressed to the [T] side, the image

 

becomes smaller.

Focusing the Screen Image

Procedure

Focus ring

Turn the focus ring to adjust the image focus.

•If the surface of the lens is dirty or has

condensation on it, it may not be possible to adjust the focus correctly. If this happens, clean the lens. (p.38, 46)

•If the projector is positioned outside the normal projecting range of 0.9–11.3 m (2.9–37.0 ft.), it may not be possible to get the correct focus. If you have trouble getting the correct focus, check the projection distance.

12