When Having Trouble

Status

Cause

Remedy or Status

See Page

Orange

High-speed

(This is not an abnormality, but if the temperature rises too

 

 

cooling in

high again, projection will stop automatically.)

p.46

 

progress

• Set the projector up in a place which is well-ventilated,

 

 

and make sure the air filter and exhaust vents are clear.

 

•Clean the air filter.

Power Indicator

: lit

: flashing

Status

Cause

Remedy or Status

See Page

Orange

Standby status

(Not abnormal)

p.8

 

 

The power cord should only be disconnected when the

 

 

 

projector is in this condition.

 

 

 

Press the [Power] button to start projection.

 

 

 

 

 

Orange

Cool-down in

(Not abnormal)

p.10

 

progress

• Please wait.

 

 

 

The cool-down period lasts for about 25 seconds.

 

•The [Power] button does not work during cool-down. Press the button again after cool-down ends.

Green

Projection in

(Not abnormal)

p.9

 

progress

 

 

 

 

 

 

Green

Warm-up in

(Not abnormal)

p.9

 

progress

Please wait.

 

 

 

Warm-up time is approximately 40 seconds.

 

 

 

After warm-up is complete, the flashing green indicator

 

 

 

changes to steady green.

 

•If the projector is not operating properly even though the indicators are all showing normal

status, refer to “When the Indicators Provide No Help” on the following page.

• If an indicator is showing a status that does not appear in the previous tables, contact your dealer or the nearest address provided in the International Warranty Terms brochure that came with the projector.

36