When the Indicators Provide No Help
Condition
The remote control does not work
|
| Power |
Computer | Color Mode | |
Menu | A/V Mute | Freeze |
|
| |
| Enter |
|
Auto |
| ESC |
Probable cause | Remedy |
|
|
Is the remote control
The operating angle for the remote control is approximately ±30º horizontally and approximately ±15º vertically. Use the remote control within these ranges. (See Quick Setup poster)
Is the remote control too far from the projector?
The operating distance for the remote control is approximately 6 m (20 ft.). Use the remote control within this distance. (See Quick Setup poster)
Is direct sunlight or strong light from | Avoid using the projector in places where the remote |
fluorescent lamps shining onto the remote | control |
control | strong light. |
|
|
Has the battery insulating tape been | When using the remote control for the first time, |
removed? | pull out the insulating tape that is protruding from |
| the battery holder. (See Quick Setup poster) |
|
|
Is the battery inserted? | Insert the battery. (p.47) |
|
|
Is the battery depleted? | Replace the battery with a new one. (p.47) |
|
|
Is the battery inserted incorrectly? | Reinsert the battery so it is installed correctly. (p.47) |
|
|
Condition
The power does not turn off (after the [Power] button is pressed)
Probable cause | Remedy |
The Power indicator remains orange.
This projector is designed so that the Power indicator remains lit even after the power has been turned off.
The Power indicator will switch off when the power cord is disconnected from the electrical outlet.
The cooling fan does not stop.
After you press the [Power] button to turn off the power, the 
After the
*The
42