Replacing Consumables
This section describes how to replace the lamp, the air filter and the battery in the remote control.
Inserting the Battery
Use the following type of battery as a replacement. 1 CR2025 lithium battery
Be sure to read Important Safety Instructions in this chapter before handling the battery.
Procedure
1 | Remove the battery holder. |
While pushing the catch of the battery holder |
inward, pull the battery holder out.
Catch
2 | New |
battery |
mark
Old battery
Remove the old battery and insert the new battery.
Check the position of the (+) mark inside the battery holder to ensure that the battery is inserted the correct way.
3 | Insert the battery holder into the remote |
control. | |
| Push the battery holder in until it clicks. |
| Dispose of used batteries in accordance |
| with local regulations. |
Appendix
47