Epson PowerLite 30c manual 18

Adjusting Image Quality

Adjusting the Tracking

If vertical stripes appear in the projected images and this cannot be fixed using automatic setup, adjust the tracking manually using the following procedure.

Procedure

1	Video		EPSON Cinema Filter : ON OFF
	Audio		Position		Adjust
	Setting		Tracking	:	0000
	Advanced		Sync .	:	0
	About		Brightness	:	0		-		+
	Reset All		Contrast	:	0		-		+
			Sharpness	:	0		-		+
			Color Mode		Select [Normal			]
			Input Signal :		RGB	YUV( YCbCr		YPbPr)
			Auto Setup :		ON	OFF
			Reset			Execute
	: Return	: Select	: Adjust

Press the [Menu] button on the remote control, and then select Tracking from the Video menu.

For details on this operation, refer to “Using the Configuration Menus.” (p.29)

2	Video			EPSON Cinema Filter : ON OFF
	Audio			Position		Adjust
	Setting			Tracking	: 1000
	Advanced			Sync .	:	0
	About			Brightness	:	0		-		+
	Reset All			Contrast	:	0		-		+
				Sharpness	:	0		-		+
				Color Mode		Select [Normal			]
				Input Signal :		RGB	YUV( YCbCr		YPbPr)
				Auto Setup :		ON	OFF
				Reset			Execute
		: Return	: Select	: Adjust

Press the [] and [] buttons to set the tracking value.

The tracking value increases or decreases each time a button is pressed.

3 Aftermenu.making the adjustment, press the [Menu] button to exit the configuration

The image will flash when continuous tracking adjustment is carried out.

18