Adjusting the Image Angle
The projector should be set up so it is as perpendicular to the screen as possible.
Seen from the side | Seen from above |
9.6
1
If it is not possible to set up the projector so it is perpendicular to the screen, it can be set up at a slight vertical angle instead. You can extend or retract the front adjustable feet to adjust the projection angle within a maximum range of 10º.
Operations
Procedure
Foot adjust buttons (side)
While pressing the two foot adjust buttons at either side, lift up the front of the projector so that the front adjustable feet can extend.
Extend the front adjustable feet until the desired angle is obtained, and then release the foot adjust buttons.
To retract the front adjustable feet, gently push down on the projector while pressing the two foot adjust buttons.
Basic
•When the feet are adjusted, it may cause distortion in the projected image. Use the keystone correction function to adjust this distortion. (p.14)
•If the projector is tilted horizontally, turn the bases of the front adjustable feet to adjust the angle.
Front adjustable foot
Extend Retract
13