Turning On the Projector
Be sure to read the Important Safety Instructions starting on p.44 before projecting images.
Connecting the Power Cable
Procedure
1
2
3
4
5
Make sure the power is off for all components connected to the projector.
Remove the lens cover.
Connect the video source or computer 
to the projector (see Quick Setup).
Connect the power cord to the projector.
Check that the power cord connector is facing the same way as the power inlet on the projector, and then insert the power cord securely into the projector.
Lit orange | Connect the other end of the power |
| cord to a grounded electrical outlet. |
| Wait until the Power indicator lights orange. |
The projector's control panel and remote control buttons cannot be operated while the Power indicator is flashing orange.
8