Adjusting Image Quality
The quality of the screen image can be adjusted as described in the following sections.
Using the EPSON Cinema Filter
When you attach the EPSON cinema filter to the projector and set the EPSON Cinema Filter command to ON, the images are adjusted to the optimum tint for movie theater images.
If you do this when a computer is connected and the projector is being used for a presentation, the image will appear darker than normal, so remove the cinema filter and change the EPSON Cinema Filter setting to OFF.
Procedure
1 |
| Attach the cinema filter. |
Nub | Align the nub on the focus ring with the notch in | |
|
| the cinema filter, and then attach the cinema |
filter.
•The EPSON cinema filter should always be installed so that the notch is aligned with the nub on the focus ring. If the cinema filter is not installed correctly, unevenness or lack of focus may occur in the projected image.
•Do not touch the glass surfaces of the cinema filter or the projector's lens when attaching the cinema filter. If fingerprints or smears get on the glass surfaces, it will reduce the clarity of the projection.
Basic Operations
2 |
| Video |
| EPSON Cinema Filter : ON | OFF |
|
|
|
| |||||||
| Audio |
|
| Position |
| Adjust |
|
|
|
|
|
| ||||
| Setting |
|
| Brightness | : | 0 |
| - |
|
|
|
|
|
| ||
|
| Advanced |
|
| Contrast | : | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
| - |
|
|
|
|
|
| ||||||
|
| About |
|
| Color | : | 0 |
| - |
|
|
|
| + |
|
|
|
| Reset All |
|
| Tint | : | 0 |
| - |
|
|
|
| + |
|
|
|
|
|
|
| Sharpness | : | 0 |
| - |
|
|
|
| + |
|
|
|
|
|
|
| Color Mode |
| Select [Theatre | ] |
|
|
| |||||
|
|
|
|
| Video Signal |
| Select [Auto | ] |
|
|
|
| ||||
|
|
|
|
| Aspect Ratio: | 4: | 3 |
|
| 16: | 9 |
|
|
|
| |
|
|
|
|
| Reset |
|
| Execute |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| : Return | / : Select | : Set |
|
|
|
|
|
|
|
|
|
|
| |
Press the [Menu] button on the remote 
control, and then select EPSON Cinema Filter from the Video menu.
For details on this operation, refer to “Using the Configuration Menus.” (p.29)
3 Select ON and then press the [Enter] button.
4 Aftermenu.changing the setting, press the [Menu] button to exit the configuration
15