146 Maintaining and Transporting the Printer
WARNING: The Stylus Pro 7800 weighs about
131 lb (59 kg) and should be lifted by two people.
The Stylus Pro 9800 weighs about 198 lb (90 kg) and should be lifted by four people.
7.Lift the printer using the hand grips where provided. (See the stickers located near the rear hand grips for the correct holding position.)
Stylus Pro 7800 | Stylus Pro 9800 |
WARNING: The card will be hot after printing. Make sure you allow the card to cool before handling it.
8.Keep the printer level while moving it. See page 148 for information about setting up the printer after transporting it.
To ship the printer a longer distance, you should repack it using the original box and packing materials. If you don’t have the original packaging, you can purchase replacement packaging from Epson. See page 11 for more information.
Removing the Optional Print Server Card
If you need to exchange your printer or ship it to Epson for repairs, you must remove the Ethernet card.
1.Turn off the printer and disconnect the power cord.
2.Disconnect the Ethernet cable.
3.Remove the two screws securing the card.
4.Make sure the card is cool before pulling it out of the slot.