Setting Up the Printer 27
WARNING: Two people are required to unpack the printer, and four are needed to set it on the stand.
Unpacking and Assembling the
Epson Stylus Pro 9800
Follow these steps to assemble your printer and its stand. If you have the Epson Stylus Pro 7800, see page 17 instead. Before you begin, make sure you have sufficient space to set up and use the printer.
The following illustration shows the minimum space required for using the Epson Stylus Pro 9800:
Note: When choosing a |
|
|
place for the printer, leave |
|
|
adequate room for easy |
|
|
access and ventilation. |
|
|
Avoid locations subject to |
|
|
direct sunlight, excessive |
|
|
heat, moisture, or dust. |
|
|
Also avoid locations near |
|
|
potential sources of |
|
|
interference, such as loud |
| 12 in. |
speakers, cordless | 12 in. | |
phones, TVs, or air |
|
|
conditioners. |
|
|
|
| 24 in. |
|
| 12 in. |
You will also need floor space of approximately 13 × 13 feet to assemble the printer and stand.