Tip: You can also load cut sheet paper without releasing the paper lever. This method is recommended for small sheets or fine art paper.
Note: For heavy paper, you may need to increase the suction by pressing the u button. This helps hold the paper in place during loading and printing.
For lightweight paper, decrease the suction by pressing the d button.
Caution: To avoid damaging the printer, never move the paper lever during printing, or while the P Power or
Pause light is flashing.
Handling Paper and Other Media 65
Loading Cut Sheets
Follow these steps to load cut sheet paper.
1.Make sure the printer is on and the roll paper cover is closed.
2.Press the l Paper Source button until the 
icon appears on the LCD display.
3.Push the paper lever back to the released position.
4.Feed the sheet into the paper slot. Make sure the right and bottom edges of the paper are straight and aligned with the scale on the printer.
5.Pull the paper lever forward, to the secured position.
6.Press the 
Pause button. The sheet feeds into printing position automatically and READY appears on the control panel.
7.Print your page. After it is finished, the sheet stays in the printer.
8.To remove your print, press the 
button or release the paper lever.