Appendix D
Setting the DIP Switches
The SQ-2000 is provided with two sets, or panels, of dual in-line package (DIP) switches.
When these switches are preset, the printer assumes a certain set of conditions each time it is turned on or reset.
For instance, if you usually print standard-sized business documents, set the column DIP switches so that the printer always assumes the necessary printing area. But if you plan to do a number of horizontal spreadsheets, the SQ-2000 allows you to select a different page size.
Most users will find there’s little need to change the switches from the factory settings (except in special instances).
Location of SwitchesOne set of DIP switches is located on the right beneath the dust cover (see Figure D-l). These are used to change the width of printing and allow the use of the optional cut sheet feeder. They are referred to as the column DIP switch panel.
