SW2-4

Set the form length with this switch. ON is 12 inches; OFF is

11 inches.

When a form feed character is sent by the computer, the paper moves to the next sheet if the optional cut sheet feeder is attached, or to the top of the next form if the optional tractor unit is being used. Set the switch according to the length of the sheets or forms you are using. The form length can also be changed temporarily under software control.

SW2-5

Set this switch to ON to automatically skip the perforations in fanfold paper.

Set this switch to OFF when you want your printing (such as program printouts) to be continuous and free from breaks caused by the printer. This switch should also be set to OFF when the word processing or other software program you are using requires complete control of the page length.

SW2-6

Set this switch to ON when you want to disable the printer buzzer.

Set it to OFF when you want the buzzer to work.

SW2-7

When you want high-speed printing in draft quality, turn the switch to OFF for a print speed of 176 characters per second.

Set this switch to ON for Letter Quality mode at 105 characters per second.

SW2-8

Set this switch to ON to enable the printer upon power ap- plication.

The ON LINE light on the control panel will glow when the printer and computer are on-line (in communication) when paper has been loaded. If this switch is not set to ON, some applications software may not operate properly.

Set this switch to OFF to allow the printer to be activated or deactivated by the computer.

D-8