Figure 1-1. Continuous paper feeding

Selecting the Right Location

To make sure you’ve picked a satisfactory location for your SQ-2000, keep the following points in mind.

The location should be:

•A flat, stable surface with enough room for continuous paper feed as shown in the illustration.

•Served by an electrical outlet that cannot be turned off accidentally by a wall switch or similar switch.

•Out of direct sunlight and not exposed to grease or dust.

•Away from electrical interference from motors and high vol- tage power lines.

•Not subject to temperatures below 41°F (5°C) or above 95°F (35°C) when the printer is operating.

•Not subject to either extremely high or extremely low humidity.

If your location meets these conditions, you’re ready to begin setting up your new printer.

6