Figure E-6, Location of parts for tractor unit

The two wheels, or sprockets, on the tractor unit must be moved to match the width of the paper you use. The paper feeds through these sprockets using the holes near the paper’s two side edges.

Move the left sprocket by releasing its locking lever. Place the sprocket about a quarter of an inch from its left-most position. Then lock it back.

Release the locking lever of the right sprocket and move it to the place you expect the holes on the right side of the paper to line up. Leave it unlocked for now.

Now raise the paper-holding covers on both the sprockets as they appear in Figure E-6.

Feed the paper under the paper separator (Figure E-7) and into the paper slot behind the platen. Push the paper through until it comes up between the paper pressure bar and in front of the platen.

E - 5