The “p” 1 in line 40 turns on the proportional printing, and the “p” 0 in line 50 turns it off.

9. Next type:

6 0 L P R I N T C H R $ ( 2 7 ) “ E ” “EMPHASIZED PRINTING” ; 7 0 L P R I N T C H R $ ( 2 7 ) “ F ” ;

10.Now press RETURN, type RUN, and press RETURN again. The SQ-2000 prints:

NORMAL PRINTING

ITALIC PRINTING

PROPORTIONAL PRINTING

EMPHASIZED PRINTING

The “E” in line 60 turns on the emphasized printing and the “F” in line 70 turns it off.

The program is now complete. To see it fully assembled on the screen, type LIST and press RETURN. You will see:

10LPRINT “NORMAL PRINTING” CHR$(10) CHR$(13);

20LPRINT CHR$(27) “4” “ITALIC PRINTING”;

30LPRINT CHR$(27) “5” CHR$(1O) CHR$(13);

40LPRINT CHR$(27) “p” CHR$(1) “PROPORTIONAL PRINTING”;

50LPRINT CHR$(27) “p” CHR$(0) CHR$(10) CHR$(13);

60LPRINT CHR$(27) “E” “EMPHASIZED PRINTING”;

70LPRINT CHR$(27) “F”;

To send the entire program to the printer, type RUN, press RETURN, and the SQ-2000 prints:

NORMAL PRINTING

ITALIC PRINTING

PROPORTIONAL PRINTING

EMPHASIZED PRINTING

Using Master Select Command

The SQ-2000 can produce over 100 different combinations of print styles. The Master Select command allows you to choose any one of these styles. The Master Select command consists of <ESC> “!" followed by a single ASCII code. The value of the ASCII code determines the printing style that is selected. A typical master select command might look like this:

<ESC> “!” 66

35