ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefgh

BCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghi

CDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghij

DEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijk

EFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijkl

FGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklm

GHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmn

HIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmno

IJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnop

Figure l-14. Self-test

9 Self-Testing the Printer

To self-testthe printer, follow these steps:

•First, be sure that you have a sheet of paper at least 8½ inches wide loaded into the printer.

•Be sure the DIP switches under the dust cover are set to match the setting below:

Figure l-15. DIP switch setting for self-test

•Adjust the paper pressure bar as shown in Step 8.

•Turn OFF the printer using its ON-OFF switch.

Now, turn ON the printer while holding down the LF button.

The printer will immediately begin printing out the self-test characters shown above.

To stop the test, simply turn OFF the printer, or wait for it to stop when it reaches the bottom of the page.

17