Epson SQ-2000 manual 169

E

Eighth-bit		control
cancel		A-22
clear	A-22
set A-21
Elite print style A-10
cancel 36, A-10
Emphasized print A-13
cancel		A-13
Environment, specifications for F-2
Epson printers code compatibility				29
Epson QX-10 computers 93
<ESC>	<SO>.		*Select one-line expanded print				A-12
<ESC>	<SI>.		Select compressed width print				A-13
<ESC>	<SP>.		Set intercharacter space A-8
<ESC> “!“.			Master Select A-10
<ESC>	“$“.		Absolute horizontal tab A-9
<ESC>	“%“.		User-defined character set on/off					A-15
<ESC>	“&“.		Define user-defined characters A-15
<ESC>	“*“.		Print graphics A-19
<ESC> "-“.			Underline on/off A-14
<ESC> “/”.			Select vertical tab channel			A-6
<ESC>	“0”.		Select l/8-inch line spacing			A - l
<ESC>	“2”.		Select l/6-inch line spacing			A-3
<ESC>	“3”.		Set n/180-inch line spacing			A-3
<ESC>	“4”.		Select italic print	A-13
<ESC>	“5”.		Cancel italic print A-14
<ESC> “:“.			Copy ROM characters to RAM				A-15
<ESC>	"<“.		Select one-line unidirectional printing A-23
<ESC>	“=“.		Clear eighth bit A-22
<ESC>	“>“.		Set eighth bit A-21
<ESC>	“#“.		Cancel eighth-bit control A-22
<ESC>	“?".		Change dot graphics density				A-19
<ESC>	“@“.		Initialize printer A-23
<ESC>	“A”.		Set n/60-inch line spacing			A-3
<ESC>	“B”.		Set vertical tabs	A-5
<ESC>	“b”.		Set vertical tabs in channels			A-6
<ESC>	“C”.		Set page length A-4
<ESC>	“D”.		Set horizontal tabs A-8
<ESC>	“E”.		Select emphasized print A-13
<ESC>	“F”.		Cancel emphasized print A-13
<ESC>	“J”.		Set one-time n/180-inch line feed					A-2
<ESC>	“K”.		Print single-density dot graphics					A-17
<ESC>	“L”.		Print double-density dot graphics					A-17
<ESC> “1”.			Set left margin	A-7
<ESC>	“M”.		Select elite width print		A-10
<ESC>	“N”.		Set skip-over-perforation A-4
< E S 0	“ 0 ” .		Cancel skip-over-perforation A-5
<ESC>	“P”.		Cancel elite width print		A-10
< E S 0	“ p ” .		Proportional printing on/off				A-10

G-4